E sc CSI Specification Low Range Turbidity. MS Word Doc. English US. 63 KB. E Turbidimeter AutoCAD Drawing. www.doorway.ru file and extract to . Calibration of Multiple and FT Turbidimeters Overview This instruction sheet describes the calibration of up to eight C, D, or E turbidimeters, or up to three FilterTrak™ (FT) instruments with a single calibration standard. Additional instruments can be calibrated using fresh calibration standards. Under normal use, Hach recommends replacing the D/E Low-range Turbidimeter lamp annually to maintain optimal performance. Replacement bulbs are burned-in at the factory to stabilize light output, and are ready for immediate installation and use. Please refer to the maintenance section of the instrument manual for further information.
The E Turbidimeter is factory-calibrated using StablCal Stabilized Formazin before shipment. The instrument must be recalibrated before use to meet published accuracy specifications. In addition, recalibration is recommended after any significant maintenance or repair and at least once every three months during normal operation. The E Turbidimeter is not affected by variations in flow and pressure. Simplicity. A simplified two-module design includes the sensor and the controller interface. The controller accepts two turbidity sensors; adding a second E sensor makes a system with two complete turbidimeters. Connections are simple plug play. Data Collection and Display. Hach's Model C Turbidimeter is a continuous reading nephelometric turbidimeter designed for low-range turbidity monitoring. It features an automatic-ranging digital display and is capable of measuring turbidities from to! NTU. As with all Hach turbidimeters, calibration is based on formazin, the.
Recommended at. NTU. 3. Multi-sensor calibration – Performed with a specialized calibration procedure for up to eight sensors on a single set of fresh. The E Turbidimeter reflects nearly 50 years of Hach leadership in turbidity measurement E Low RangeTurbidimeter Analysis System-User Manual. A built-in data logger collects turbidity measurement at user selectable intervals ( minutes), along with calibration and verification points, alarm history.
0コメント